For weeks now I have been trying to unbrick the LG G Pad V410, there is no V410 support here on XDA, so this was the closest I could get.
I have tried everything, and what I have found is that if I take a SDCard and partition it to match it to the EMMC of the V410 then use WindowsLGExtract to extract the KDZ/DZ. Next I flashed all the .bin to the sdcard, inserted in into the GPAD then hooked to my computer. Now it goes from Qualcomm QDL mode to LG Electronics. With the partitioned semi flashed sdcard, while holding down power, it shows the battery at 0 and tells to charge it, while doing the same on charger, it only shows at 0% but does not charge.
Only problem, no charge, no charge no KDZ flash possibility using LG flash tool :(
Was curious, so did a search and found a modemst1.imq and modemst2.imq for the LG G2 and flashed those to the SDCARD. Now when using the read phone information via LG Flash tool now, it now tells me that the imei is not valid, did not exist before.
Well hoping somebody could dd the following bolded partitions on their own LG V410
These partitions are from the V400, tried to see if I had any better luck using the V400 KDZ, this did not work, reflashed the modem.bin, boot.bin etc... leaving the partitions as is and it worked. The V410 is differant, so please please, could somebody dd the above partitions.
I have tried everything, and what I have found is that if I take a SDCard and partition it to match it to the EMMC of the V410 then use WindowsLGExtract to extract the KDZ/DZ. Next I flashed all the .bin to the sdcard, inserted in into the GPAD then hooked to my computer. Now it goes from Qualcomm QDL mode to LG Electronics. With the partitioned semi flashed sdcard, while holding down power, it shows the battery at 0 and tells to charge it, while doing the same on charger, it only shows at 0% but does not charge.
Only problem, no charge, no charge no KDZ flash possibility using LG flash tool :(
Was curious, so did a search and found a modemst1.imq and modemst2.imq for the LG G2 and flashed those to the SDCARD. Now when using the read phone information via LG Flash tool now, it now tells me that the imei is not valid, did not exist before.
Well hoping somebody could dd the following bolded partitions on their own LG V410
These partitions are from the V400, tried to see if I had any better luck using the V400 KDZ, this did not work, reflashed the modem.bin, boot.bin etc... leaving the partitions as is and it worked. The V410 is differant, so please please, could somebody dd the above partitions.
via xda-developers http://ift.tt/1lDExw4
Put the internet to work for you.
via XDA Android http://ift.tt/1lde0Fd
Put the internet to work for you.
No comments:
Post a Comment