How to active MyfordTouch Navigation
As noted by flsdiver in the previous myfordtouch thread
(http://ift.tt/1STpOMy)
Modify the APIM as-built data using Forscan (you will need to request an extended license for Forscan)
You will also need a ELM327 device that can do HSCAN/MSCAN.
1) Program APIM using Forscan & ELM327 device. Change the as built data bit with
(7d0-01-02. Byte 1 = 00 No Nav. Byte 1 = 04 with Nav)
Turn key off, turn on, sync black screen for a bit, then performing routine system maintenance.... for about 2 mins.
*Unknown if ACM as built data bit needs to be changed yet.
2) Program ACM as build with bit mentioned in this thread. Not sure needed/what it does but I did it anyway.
3) Download license (BT4T-14F500-BE) from URL attached in the excel document. You will need to replace "YAABBCCD" in the URL section and provide your vehicle's ESN number otherwise it won't work. This appears to be case sensitive so make sure it is all uppercase letters.
You can get the ESN number in the settings section on the myfordtouchunit. You do not need to change anything else in the URL.
*Ford could change this URL and this would no longer work!
4) Create the USB device and edit the autoinstall.lst file to only install the BT4T-14F500-BE file.
5) Stick in A7 nav SD Card.
6) Enjoy the trip!
All credit goes to flsdiver for the URL/Excel doc/steps needed.
As noted by flsdiver in the previous myfordtouch thread
(http://ift.tt/1STpOMy)
Modify the APIM as-built data using Forscan (you will need to request an extended license for Forscan)
You will also need a ELM327 device that can do HSCAN/MSCAN.
1) Program APIM using Forscan & ELM327 device. Change the as built data bit with
(7d0-01-02. Byte 1 = 00 No Nav. Byte 1 = 04 with Nav)
Turn key off, turn on, sync black screen for a bit, then performing routine system maintenance.... for about 2 mins.
*Unknown if ACM as built data bit needs to be changed yet.
2) Program ACM as build with bit mentioned in this thread. Not sure needed/what it does but I did it anyway.
3) Download license (BT4T-14F500-BE) from URL attached in the excel document. You will need to replace "YAABBCCD" in the URL section and provide your vehicle's ESN number otherwise it won't work. This appears to be case sensitive so make sure it is all uppercase letters.
You can get the ESN number in the settings section on the myfordtouchunit. You do not need to change anything else in the URL.
*Ford could change this URL and this would no longer work!
4) Create the USB device and edit the autoinstall.lst file to only install the BT4T-14F500-BE file.
5) Stick in A7 nav SD Card.
6) Enjoy the trip!
All credit goes to flsdiver for the URL/Excel doc/steps needed.
via xda-developers http://ift.tt/1STpRaZ
Put the internet to work for you.
No comments:
Post a Comment