my HTC desire 820s is not Supporting USB OTG. How can I enable that feature... please tell me....
via xda-developers http://ift.tt/1OKtMhS
Put the internet to work for you.
Monday, February 29, 2016
Samsung Galaxy S7 vs. LG V10
I need help deciding between the Galaxy S7 and the LG V10! I have Verizon and I'm due for an upgrade, I've researched the crap out of both of these phones, but it would be nice to get some input on the pros and cons of the different devices to help me make up my mind. Any input is more than welcome. Thanks!
via xda-developers http://ift.tt/1LsoGMj
Put the internet to work for you.
Artech 21 - Vivid Arkansas Series
Please delete post
via xda-developers http://ift.tt/1LsoGMl
Put the internet to work for you.
Just installed PureNexus + Elemental X
Can I factory reset when my phone is done loading?
I like having a clean internal storage (there's some leftover folders from before). Will doing a factory reset break the rom or kernel? (Backup & Restore Factory Reset option in settings, not TWRP or anything else)
I like having a clean internal storage (there's some leftover folders from before). Will doing a factory reset break the rom or kernel? (Backup & Restore Factory Reset option in settings, not TWRP or anything else)
via xda-developers http://ift.tt/1oUNV02
Put the internet to work for you.
!!! Stock ringtones of galaxy s7 !!!
Can any one here please extract the media folder of galaxy s7/edge and share with us.:D
via xda-developers http://ift.tt/1OKtMyd
Put the internet to work for you.
Window 10 not trusted issue
I am fed up of this windows 10 publisher not trusted issue
Whenever i try to install an application from the internet it shows the same sign
Really need someone's help
Sent from my Micromax E311 using xda-developers.com, powered by appyet.com
Whenever i try to install an application from the internet it shows the same sign
Really need someone's help
Sent from my Micromax E311 using xda-developers.com, powered by appyet.com
via xda-developers http://ift.tt/1Rht9hJ
Put the internet to work for you.
How to root micromax canvas tab p470
Hi,
Micromax is an indian compny and build stuff which dont last long micromax is a decent compny and devices are decently working
Today, i'll show you how to root micromax canvas tabp470
Well, its very easy one click root
1. Download an app called kingroot
2. U should have 3g/4g/wifi for successful rooting
3. Install the app and just click on "start root"
4. All done all set ur device will be successfully rooted enjoy the freedom
Regards
Singh sardar
Micromax is an indian compny and build stuff which dont last long micromax is a decent compny and devices are decently working
Today, i'll show you how to root micromax canvas tabp470
Well, its very easy one click root
1. Download an app called kingroot
2. U should have 3g/4g/wifi for successful rooting
3. Install the app and just click on "start root"
4. All done all set ur device will be successfully rooted enjoy the freedom
Regards
Singh sardar
via xda-developers http://ift.tt/1L0FEBx
Put the internet to work for you.
Goophone I6
So recently a customer of mine asked if it would be possible to put android stock software from lets say a note 5 or edge on a clone iPhone. As far as I understand these clone iPhone's run a similar android system but with a apple launcher. Would it be possible to root this and put a different stock software on one of these clones? Thanks! and if you get your info from somewhere else please site so I can read more on the subject!
via xda-developers http://ift.tt/1L0FBWq
Put the internet to work for you.
About the claming 2GB ram of the Samsung Galaxy S5
Hi folks!
pretty new to the forum and for now I am not knowing much about the android. But here got some basic question that hinders my daily use of my cellphone:
The device I am using is samsung Galaxy S 5, and the model is G9008v, for those you know is the version with the China Mobile carrier.
SO, the ram is claimed to be 2GB, right?
bUT WHEN I am using it, the available ram is only about the 300mbs....
Here I've attached the ram status so that I could get some help. As you could see here only THREE programs ar erunning but the total ram is 1.6GB and there are 1.3 GB taken, For no use?
Thanks!
pretty new to the forum and for now I am not knowing much about the android. But here got some basic question that hinders my daily use of my cellphone:
The device I am using is samsung Galaxy S 5, and the model is G9008v, for those you know is the version with the China Mobile carrier.
SO, the ram is claimed to be 2GB, right?
bUT WHEN I am using it, the available ram is only about the 300mbs....
Here I've attached the ram status so that I could get some help. As you could see here only THREE programs ar erunning but the total ram is 1.6GB and there are 1.3 GB taken, For no use?
Thanks!
via xda-developers http://ift.tt/1nekmos
Put the internet to work for you.
Ultra Tablet keyboard won't connect, Jide support won't respond.
Hello,
I've had my Remix Ultra tablet for three weeks, and on Tuesday of last week the keyboard stopped connecting.
I restarted, cleared cache, dusted off pin connectors, factory reset...all to no avail. It isn't rooted, running OS 1.5.
I contacted Jide support through their website on Wednesday (five days ago) and haven't heard back.
Any suggestions? Anyone else been through this?
I've had my Remix Ultra tablet for three weeks, and on Tuesday of last week the keyboard stopped connecting.
I restarted, cleared cache, dusted off pin connectors, factory reset...all to no avail. It isn't rooted, running OS 1.5.
I contacted Jide support through their website on Wednesday (five days ago) and haven't heard back.
Any suggestions? Anyone else been through this?
via xda-developers http://ift.tt/1Uvv1Zz
Put the internet to work for you.
S6 - Boot Loop - No Recovery - HELP!!!
Hi All,
I a strange thing happened yesterday. My S6 got stuck and when I did a force restart it ended up in a boot loop. To worsen the problem my device had reactivation enabled. I found out that my recovery is not loading also. I guess its due to the reactivation security.
So far I have tried the following:
1. Tried to install the stock firmware
2. Tried to install new stock firmware (marshmellow)
3. Tried Kies and Smart Connect (did not do anything)
I'm pretty much clueless at this point. Any help is appreciated.
Thanks in advanced...
I a strange thing happened yesterday. My S6 got stuck and when I did a force restart it ended up in a boot loop. To worsen the problem my device had reactivation enabled. I found out that my recovery is not loading also. I guess its due to the reactivation security.
So far I have tried the following:
1. Tried to install the stock firmware
2. Tried to install new stock firmware (marshmellow)
3. Tried Kies and Smart Connect (did not do anything)
I'm pretty much clueless at this point. Any help is appreciated.
Thanks in advanced...
via xda-developers http://ift.tt/1RhtkJV
Put the internet to work for you.
Rom based on stock?
are there any roms for the g4 811 that are based on the stock rom? ive searched to the best of my ability.
via xda-developers http://ift.tt/1nekjcn
Put the internet to work for you.
Was the article that the S7 will lock to the first Sim inserted true?
http://ift.tt/1L0Fvhw
I know some t-mobile customers already have devices in hand (or will be getting it within a few days). Has anyone checked if the above article is true? Would be awesome to know for all US who aren't on T-mo or any major carrier (I'm on Cricket, No preorders, and no edge listed so far.)
Would be awesome to preorder the ATT version from a place like target, get those preorder bonuses (target has $100 GC + standard 5% off for target card members, so its probably the cheapest place to get it), and then use it on Cricket.
Note: This is primarily meant for US carriers and devices. not other countries, which has different laws and networks.
I know some t-mobile customers already have devices in hand (or will be getting it within a few days). Has anyone checked if the above article is true? Would be awesome to know for all US who aren't on T-mo or any major carrier (I'm on Cricket, No preorders, and no edge listed so far.)
Would be awesome to preorder the ATT version from a place like target, get those preorder bonuses (target has $100 GC + standard 5% off for target card members, so its probably the cheapest place to get it), and then use it on Cricket.
Note: This is primarily meant for US carriers and devices. not other countries, which has different laws and networks.
via xda-developers http://ift.tt/1Rht6Cw
Put the internet to work for you.
Lost private mode photos after moar flash
I had 2 gig of photos in private mode on my sd card they are still there taking up space but after i flashed my phone with moar 7 i cant see them anymore. I removed the SD card before I did the flash so it didn't erase them. Can someone please help me see them again?
Sent from my SM-G900P using XDA Free mobile app
Sent from my SM-G900P using XDA Free mobile app
via xda-developers http://ift.tt/1nekmoq
Put the internet to work for you.
Getting Quick Charge to Work?
Hey guys. Loving the phone so far, but I can't seem to get my Quick Charge charge to work. This is the specific charger, and an answer on this question says it should work.
When I plug it in it has a blue LED (Normal charging speed) then it changes to green (Quick charging) then it turns off the LED and the cycle repeats. It stays on each LED color for 10-15 seconds before changing.
It worked on my One M8, so I don't see why it wouldn't work here. I have TruePureX and Frankenclark installed, but it did the same thing in recovery so I don't think it's software. The stock Turbo Charger works great, but I want one that to take places when.
Any ideas?
When I plug it in it has a blue LED (Normal charging speed) then it changes to green (Quick charging) then it turns off the LED and the cycle repeats. It stays on each LED color for 10-15 seconds before changing.
It worked on my One M8, so I don't see why it wouldn't work here. I have TruePureX and Frankenclark installed, but it did the same thing in recovery so I don't think it's software. The stock Turbo Charger works great, but I want one that to take places when.
Any ideas?
via xda-developers http://ift.tt/1L0Fw54
Put the internet to work for you.
Honor 4c brick
need help
after upgrade to lollipop whit update.app I have full brick.
then power on pressed - leds flash red and green, after few seconds device is shown as ㌲㔴㜶㤸 and turned off after 10 or 20 seconds.
any way to unbrick?
any software not sd card metod?
after upgrade to lollipop whit update.app I have full brick.
then power on pressed - leds flash red and green, after few seconds device is shown as ㌲㔴㜶㤸 and turned off after 10 or 20 seconds.
any way to unbrick?
any software not sd card metod?
via xda-developers http://ift.tt/1L0FLgH
Put the internet to work for you.
How to restore my G900W8 back to original factory software. Major issues inside....
I was running CM13 for a while with no issues but I decided today to go back to stock because I want flip cover/s-view functionality without using garbage 3rd party apps to halfway do this.
Anyway....I tried to flash the stock ROM using Odin but it just made me stuck at a boot loop where it would play the Samsung animation about half way, freeze then restart and do this over and over again..
I installed TWRP and did a full wipe of everything, and now tried to install stock firmware using Odin again, and it writes everything to the phone in download mode then gets to the point where the device resets but then when it turns back on it just sits at the boot screen saying "recovery booting...." and locks up from there. If I even plug the phone in to charge it will freeze on the battery with the lightning bolt image and not proceed to the charging animation as it normally would and I need to pop the battery out to hard reset it out of this..
When I try to flash the stock firmware (G900W8VLU1COI4_G900W8OYA1COI4_G900W8VLU1COI4_HOME .tar) Odin says this:
Please help....I don't know what I am missing. Is there a step I have missed somewhere along the way? Everything I read simply tells me to install the stock firmware using Odin to fix this, but that is actually what caused this issue in the first place and I cannot find any other info anywhere.
Anyway....I tried to flash the stock ROM using Odin but it just made me stuck at a boot loop where it would play the Samsung animation about half way, freeze then restart and do this over and over again..
I installed TWRP and did a full wipe of everything, and now tried to install stock firmware using Odin again, and it writes everything to the phone in download mode then gets to the point where the device resets but then when it turns back on it just sits at the boot screen saying "recovery booting...." and locks up from there. If I even plug the phone in to charge it will freeze on the battery with the lightning bolt image and not proceed to the charging animation as it normally would and I need to pop the battery out to hard reset it out of this..
When I try to flash the stock firmware (G900W8VLU1COI4_G900W8OYA1COI4_G900W8VLU1COI4_HOME .tar) Odin says this:
Quote:
| |
Please help....I don't know what I am missing. Is there a step I have missed somewhere along the way? Everything I read simply tells me to install the stock firmware using Odin to fix this, but that is actually what caused this issue in the first place and I cannot find any other info anywhere.
via xda-developers http://ift.tt/1L0FABR
Put the internet to work for you.
Possibly hard bricked Moto xt1060 Vzn
I Just attempted a root on my xt1060 vzn moto x and i think i hard bricked it. I was supposed to update the Qhsusb_dload drivers on my windows 7 yet i didn't find them. At this point my device was turned off an i had no way of getting it back on, no fastboot or anything. The green led light will light up when its plugged in and i hold the power button for a while. When i plug the usb and phone into the pc it will briefly show up as Qhsusb_driver in the device manager then switch to Relink HS USB QDloader 900. If there is any hope for my device and someone could share it that would be greatly appreciated. If someone could post a solution you are a lifesaver.
via xda-developers http://ift.tt/1RhtgJY
Put the internet to work for you.
Default Black - Custom Unlocked Boot Logo - Image Set
So this is exactly like my "BioActive" Boot Logo (same extra features)
Only difference is this one has the default stock Motorola Logo converted to a black background.
What i did was replace the warning message about the Bootloader being unlocked with this new Logo.
As well as the standard "Locked" Boot Logo..
So.. this means whether your phone is locked or unlocked you will see the preview Logo picture below.
This also has my improved button / Caption image set integrated and the charging screens modded black too..
These Boot logo's i have made are high quality !
I have verified the colors are proper and checked for errors etc..
I had found about 4 errors on the stock Moro Boot logo i corrected.
The other thing i wanted to do is make sure the performance is good so i minimized the file size as much as possible.
One way i did this was to make sure all Exported PNG images i used were "Flattened"
Another thing i did was make sure that 100% of the images all had a consistent DPI.. 96 (something Moto was sloppy about)
This applies to my other Logo too (this one just has 2 Logo's changed otherwise they are the same)
So as usual do what ever ya want with them and again i created these using "Motorola Boot Logo Maker"
I will add the "Flashable" .zip file here as an attachment.
Or just extract the zip file and manually flash the Logo.bin.
Feedback / suggestions are welcome.. enjoy :)
Only difference is this one has the default stock Motorola Logo converted to a black background.
What i did was replace the warning message about the Bootloader being unlocked with this new Logo.
As well as the standard "Locked" Boot Logo..
So.. this means whether your phone is locked or unlocked you will see the preview Logo picture below.
This also has my improved button / Caption image set integrated and the charging screens modded black too..
These Boot logo's i have made are high quality !
I have verified the colors are proper and checked for errors etc..
I had found about 4 errors on the stock Moro Boot logo i corrected.
The other thing i wanted to do is make sure the performance is good so i minimized the file size as much as possible.
One way i did this was to make sure all Exported PNG images i used were "Flattened"
Another thing i did was make sure that 100% of the images all had a consistent DPI.. 96 (something Moto was sloppy about)
This applies to my other Logo too (this one just has 2 Logo's changed otherwise they are the same)
So as usual do what ever ya want with them and again i created these using "Motorola Boot Logo Maker"
I will add the "Flashable" .zip file here as an attachment.
Or just extract the zip file and manually flash the Logo.bin.
Feedback / suggestions are welcome.. enjoy :)
via xda-developers http://ift.tt/1Rhtf8S
Put the internet to work for you.
Help with brick?
Hi I was running the Cyanogen Mod Nightly for my phone, and hadn't updated it for about a week. When I went in to my settings to update it, I downloaded the latest one and when it was done it prompted me to start it, so I did. It got to about 2%, and after that it's been looping in boot. The screen flashes on and off instantly every 5 seconds. Power + Volume Up works, it shows the HTC screen and says it's going into recovery, but then it just loops in boot again.
Is there any fix/hope for my phone? :(
Is there any fix/hope for my phone? :(
via xda-developers http://ift.tt/1WSMJVm
Put the internet to work for you.
March 1st in China
It seems as though the new download is available. I only have access to my phone so can't be 100% certain, if anyone else wants to check it would be appreciated.
Edit....sorry I am pretty sure I was wrong.
Edit....sorry I am pretty sure I was wrong.
via xda-developers http://ift.tt/1Lsc5ZM
Put the internet to work for you.
About double click the screen to wake up the device.
Can I double click the screen to wake up the device through flash others ROMS ?
If I can , please tell me how to do it. Thanks!
If I can , please tell me how to do it. Thanks!
via xda-developers http://ift.tt/1LscfjC
Put the internet to work for you.
KDZ download link
been trying to download stock JB rom for my E988, but the links on this site http://ift.tt/1kcMlOT for stock are not working, I can download only the KDZ file for KK. And the other link here http://ift.tt/1s1OiSa only offers the lates rom available which is also KK. If anyone know of any working link to Stock JB rom please share so I can download, THANK YOU!! I have E988 Philippine|
via xda-developers http://ift.tt/1Lscifs
Put the internet to work for you.
[5.1] [REQUEST] Need a CWM Recovery for the Archos 50d Helium
Hello !
As the title says I need a custom recovery for my phone.
I'm using the Archos 50d Helium and it is running Lollipop 5.1.
I also have uploaded the stock recovery.img here so that you could try to work with it. :p
Can someone try to make one for me ?
I'm really not familiar with compiling stuff on Android. :(
Thanks and have a good day ! :victory:
Ps: If you have any question don't hesitate & ask me I'll gladly answer ! :)
As the title says I need a custom recovery for my phone.
I'm using the Archos 50d Helium and it is running Lollipop 5.1.
I also have uploaded the stock recovery.img here so that you could try to work with it. :p
Can someone try to make one for me ?
I'm really not familiar with compiling stuff on Android. :(
Thanks and have a good day ! :victory:
Ps: If you have any question don't hesitate & ask me I'll gladly answer ! :)
via xda-developers http://ift.tt/1LsclYu
Put the internet to work for you.
phone wont turn on - please help me reset before returning to verizon
Today my power button was acting weird. It worked fine during a long press to do a "restart" but wouldn't turn on or off the phone, so I had to use my Knock code all day. I lost power this evening and now it wont turn on at all.
Phone is charging fine but nothing I can do will turn it on. Removed and replaced the battery, charged the phone. Long hold with vol down button pressed to try to do factory reset and nothing. screen looks normal when the battery is charging, but it wont turn on. Nothing happens when I plug it into a computer either.
I really don't want to return this to Verizon without doing factory reset first. Please help me.
Phone is charging fine but nothing I can do will turn it on. Removed and replaced the battery, charged the phone. Long hold with vol down button pressed to try to do factory reset and nothing. screen looks normal when the battery is charging, but it wont turn on. Nothing happens when I plug it into a computer either.
I really don't want to return this to Verizon without doing factory reset first. Please help me.
via xda-developers http://ift.tt/1Lscueu
Put the internet to work for you.
Subscribe to:
Posts (Atom)